Lekkie ONENUT Bafang motor lock nut in anodized red

Lekkie ONENUT – Bafang Motor Lock Nut

$27.95
Color: Red

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa
Secured checkout

One nut instead of two, and no odd Bafang tool required.

Bafang mid-drives normally hold the motor in the bottom bracket with two stock lock nuts, and the inner one needs a special tool most riders don't own. The Lekkie ONENUT replaces both stock nuts with a single, fully CNC-machined aluminum nut that tightens with a standard 16-notch Shimano-style bottom bracket tool or the Lekkie Sixteen-44 socket.

Once it's torqued down, two grub screws lock the ONENUT to the bottom bracket threads, so it can't vibrate loose or back off on rough trails. A loose lock nut is one of the most common reasons a mid-drive starts to shift or clunk, so this is a smart add-on for any Bafang install.

Fitting a 73mm bottom bracket shell? The stock Bafang cover won't fit there, and the ONENUT gives you a clean, finished look anyway. Designed in New Zealand by Lekkie.

  • Replaces both stock Bafang motor lock nuts
  • Built-in grub-screw locking: stays tight
  • Tightens with a standard 16-notch BB tool or Lekkie Sixteen-44 socket
  • Full CNC-machined aluminum, anodized finish
  • Fits Bafang BBSHD and BBS01/BBS02
Short Description ▼

A single CNC-machined lock nut that replaces both stock Bafang motor nuts. It tightens with a standard 16-notch BB tool and locks in place with two grub screws, so your motor stays put.

FAQS ▼

Does it replace both stock nuts?

Yes. The ONENUT replaces both the inner and outer Bafang lock nuts.

Do I need a special tool?

No special Bafang tool. Use a standard 16-notch Shimano-style BB tool (wrench type) or the Lekkie Sixteen-44 socket.

Will it fit a 73mm bottom bracket?

Yes. It's a great fix for 73mm shells, where the stock Bafang cover can't be fitted.

What’s Included ▼
  • 1 × Lekkie ONENUT motor lock nut
  • 2 × locking grub screws (pre-installed)
Installation ▼
  1. Install the motor in the bottom bracket as usual, leaving off both stock Bafang lock nuts.
  2. Thread the ONENUT onto the motor sleeve by hand.
  3. Tighten with a Lekkie Sixteen-44 socket or a wrench-style 16-notch BB tool. Most shallow sockets don't fully engage the nut.
  4. Snug the two grub screws to lock the nut to the threads.
  5. Re-check after your first few rides.
Specifications ▼

Compatibility: Bafang BBSHD, Bafang BBS01 / BBS02

Material: Forged 6061-T6 aluminum, CNC machined

Finish: Anodized red

Weight: 80g

Locking: 2 grub screws lock the nut to the bottom bracket threads

Tool: Lekkie Sixteen-44 socket or Shimano-style 16-notch BB tool

Designed in: New Zealand

Free shipping above 500$

Making a big decision? We'll make it easier. Shipping is on us. 

Making a big decision? We'll make it easier. Shipping is on us. 

One Year Warranty

Manufacturer defect and part/repair support. Extended warranties available.

Manufacturer defect and part/repair support. Extended warranties available.

Real Results

Rider jumping a converted mountain e-bike
$27.95
Customer riding her converted orange cruiser e-bike by a lake
$27.95
Parents riding a converted longtail cargo e-bike with kids on the back
$27.95
Green tandem bike converted to electric
$27.95

Lekkie ONENUT – Bafang Motor Lock Nut

Red

Still have questions?

We can help. Tell us about your bike and goals. We'll point you in the right direction.