Wrench
"Does the job."
Code Copied
/
WRENCH - BBSHD AND BBS02 MID DRIVE INSTALLATION TOOL
The Bafang BBSHD or BBS02 installation requires a special wrench to install them. This tool has been custom machined out of stainless steel to make installing and tightening the inner nut and outer locknut on the BBS02 and BBSHD easy.
This wrench will let you tighten the nut and the locknut to install a Bafang BBSHD or BBS02 mid-drive motor into a standard threaded bottom bracket. Be sure to get it tight or the motor could slip. Tapping it a few times with a mallet after it is as tight as you can get it with the wrench by hand is usually about right. The lock nut is made of aluminum and doesn't need to be nearly as tight as the steel nut. If there are not enough threads to get the lock ring on all the way leave it off and put some blue Loctite on the steel nut.
Making a big decision? We'll make it easier. Shipping is on us.
Making a big decision? We'll make it easier. Shipping is on us.
Manufacturer defect and part/repair support. Extended warranties available.
Manufacturer defect and part/repair support. Extended warranties available.
Overall rating: 4.6666665 / 5 from 6 reviews.
Review topics: [].
"Does the job."
"This tool was the perfect fit for the job I had at hand to lock & stabilize a bafang 1000w mid drive motor.Thanks."
"The wrench worked well and made the assembly of my BBSHD super easy. When you do go to crank down on the lock nut with this wrench it does dig into your hands a bit. It doesn't have a nice handle like fancier bottom bracket tools. Gloves might have been nice."
"Without this tool getting my bbs02 off so that I could install my tsdz2 was extremely difficult."
"It fits and it works!"
"Worked perfect. Nice and sturdy made installation of motor to bracket smooth."
We can help. Tell us about your bike and goals. We'll point you in the right direction.