E-bike conversion kit for the Specialized Fatboy
Independent compatibility guide. Not affiliated with or endorsed by Specialized.
Yes. The Specialized Fatboy uses a PF30 (46mm), 100mm fat bottom bracket, which fits the CYC Photon 2 mid-drive kit in the 100mm version with our Two Piece PF46/PF30 bottom bracket adapter, which we add to the bundle for you. Fat-bike chainstays can sit where the motor mounts, so book a quick consultation before ordering and we'll confirm spacers and chainline.
Fit source: performancebike.com
Fit at a glance
- Bike
- Specialized Fatboy
- Model years
- All
- Bike type
- Fat bike
- Bottom bracket
- PF30 (46mm), 100mm fat
- Photon 2 version
- 100mm version
- Adapter
- Two Piece PF46/PF30 bottom bracket adapter (included in the bundle)
- Chainring
- 32T
- Fit evidence
- Confirmed from manufacturer or retailer specs
Fit notes: PF30 shell, 100mm wide.
Recommended kit: CYC Photon 2
CYC Photon 2 motor kit from $950.00. Pick your frame size and battery, then add everything in one click.
Questions
Will a mid-drive motor fit the Specialized Fatboy?
Yes. The Specialized Fatboy uses a PF30 (46mm), 100mm fat bottom bracket, which fits the CYC Photon 2 mid-drive kit in the 100mm version with our Two Piece PF46/PF30 bottom bracket adapter, which we add to the bundle for you. Fat-bike chainstays can sit where the motor mounts, so book a quick consultation before ordering and we'll confirm spacers and chainline.
Which CYC Photon 2 version do I need?
Order the CYC Photon 2 100mm version plus the Two Piece PF46/PF30 bottom bracket adapter. The add-to-cart button on this page picks both for you.
What comes in the Photon 2 kit?
The bundle includes the CYC Photon 2 torque-sensing mid-drive motor, SW102T display, 32T chainring, ISIS self-extracting cranks (160mm, or 170mm for large and XL frames), Universal Deluxe throttle, magnetic brake cutoff sensors and the install tools. With the EBC 52V 10Ah Mini Shark (small and medium frames) or 48V 21.2Ah Jumbo Shark (large and XL frames) battery you also get a free 2A smart charger and a free 2nd-year warranty.
How do I check my bottom bracket?
A square-taper or hex crank spindle almost always means a threaded shell. Remove the cranks and measure the shell width: 68, 73, 83, 100 or 120mm. If the bearings press straight into the frame with no threads, it is press-fit.