E-bike conversion kit for the Silverback Slade (Trail / Comp)
Independent compatibility guide. Not affiliated with or endorsed by Silverback.
Usually, but the Silverback Slade (Trail / Comp) has used different bottom brackets across model years. Measure your shell or pick your bottom bracket below, and we'll configure the CYC Photon 2 kit to match.
Fit source: endless-sphere.com
Fit at a glance
- Bike
- Silverback Slade (Trail / Comp)
- Model years
- 2018
- Bike type
- Hardtail mountain
- Bottom bracket
- Changed across model years
- Fit evidence
- Reported by owners who converted this bike
Fit notes: 27.5+ Boost hardtail. Owner says the Photon fit perfectly after other kits would not; the battery is a snug fit in the frame.
Recommended kit: CYC Photon 2
CYC Photon 2 motor kit from $950.00. Pick your frame size and battery, then add everything in one click.
Questions
Will a mid-drive motor fit the Silverback Slade (Trail / Comp)?
Usually, but the Silverback Slade (Trail / Comp) has used different bottom brackets across model years. Measure your shell or pick your bottom bracket below, and we'll configure the CYC Photon 2 kit to match.
Which CYC Photon 2 version do I need?
It depends on your bottom bracket: threaded 68, 73 or 83mm shells take the 68-73-83mm version, BB92 press-fit takes the BB92 version, and 100mm or 120mm fat-bike shells take the matching wide version.
What comes in the Photon 2 kit?
The bundle includes the CYC Photon 2 torque-sensing mid-drive motor, SW102T display, 38T chainring, ISIS self-extracting cranks (160mm, or 170mm for large and XL frames), Universal Deluxe throttle, magnetic brake cutoff sensors and the install tools. With the EBC 52V 10Ah Mini Shark (small and medium frames) or 48V 21.2Ah Jumbo Shark (large and XL frames) battery you also get a free 2A smart charger and a free 2nd-year warranty.
How do I check my bottom bracket?
A square-taper or hex crank spindle almost always means a threaded shell. Remove the cranks and measure the shell width: 68, 73, 83, 100 or 120mm. If the bearings press straight into the frame with no threads, it is press-fit.