E-bike conversion guide

E-bike conversion kit for the Rocky Mountain Slayer

Independent compatibility guide. Not affiliated with or endorsed by Rocky Mountain.

Yes. The Rocky Mountain Slayer uses a Press-fit BB86/BB92 (41mm) bottom bracket, which fits the CYC Photon 2 mid-drive kit in the BB92 version (includes BB92 threaded adapters), with no adapter needed. Check that the motor clears your rear linkage and chainstay before ordering.

Fit source: cycmotor.com

Fit at a glance

Bike
Rocky Mountain Slayer
Model years
All
Bike type
Full-suspension mountain
Bottom bracket
Press-fit BB86/BB92 (41mm)
Photon 2 version
BB92 version (includes BB92 threaded adapters)
Adapter
None needed
Chainring
38T
Fit evidence
Confirmed from manufacturer or retailer specs

Fit notes: CYC's own install video uses a BB92 Slayer.

Recommended kit: CYC Photon 2

CYC Photon 2 motor kit from $950.00. Pick your frame size and battery, then add everything in one click.

Questions

Will a mid-drive motor fit the Rocky Mountain Slayer?

Yes. The Rocky Mountain Slayer uses a Press-fit BB86/BB92 (41mm) bottom bracket, which fits the CYC Photon 2 mid-drive kit in the BB92 version (includes BB92 threaded adapters), with no adapter needed. Check that the motor clears your rear linkage and chainstay before ordering.

Which CYC Photon 2 version do I need?

Order the CYC Photon 2 BB92 version (includes BB92 threaded adapters). The add-to-cart button on this page picks both for you.

What comes in the Photon 2 kit?

The bundle includes the CYC Photon 2 torque-sensing mid-drive motor, SW102T display, 38T chainring, ISIS self-extracting cranks (160mm, or 170mm for large and XL frames), Universal Deluxe throttle, magnetic brake cutoff sensors and the install tools. With the EBC 52V 10Ah Mini-Max battery you also get a free 2A smart charger and a free 2nd-year warranty.

How do I check my bottom bracket?

A square-taper or hex crank spindle almost always means a threaded shell. Remove the cranks and measure the shell width: 68, 73, 83, 100 or 120mm. If the bearings press straight into the frame with no threads, it is press-fit.

Search another bike · Book a free phone consultation