CYC Gen 3 Upgrade Feature Summary

X1 Pro Gen 3

ULTIMATE EBIKE POWER

Achieve the ultimate with the X1 Pro Gen 3. Equipped with advanced torque sensing, instant throttle capabilities, & customizable tuning. 

Made for the extreme. Unheard of power.

• RATED POWER: (2 VERSIONS AVAILABLE) 3000W & 5000W
• PEAK TORQUE: 150N.m./250N.m.
• COMPATIBLE: 36V to 72V
• CHAINRING OPTIONS: 32T & 38T (30-52T with BCD104)
• BOTTOM BRACKET OPTIONS: 68-120MM
• BB92 SUPPORTED (100mm w/adapter)

X1 Stealth Gen3

SUPREME ALL TERRAIN EBIKING

Dream big with the X1 Stealth Gen 3. Designed for all terrains, leave no trail uncrossed with advanced torque sensing, instant throttle capabilities, and customized tuning. Made for a powerful yet natural riding experience. 

• RATED POWER: 1500W 
• PEAK TORQUE: 150N.m.
• COMPATIBLE: 36V to 52V
• CHAINRING OPTIONS: 32T & 38T (30-46T with BCD104)
• BOTTOM BRACKET OPTIONS: 68-120MM
• BB92 SUPPORTED

CONTROLLER RELIABILITY AND PERFORMANCE

X1 PRO Gen 3 is now paired with the X-series controller which makes a day and night difference than the previous models. Both the PAS and throttle experience are refined. The following issues are addressed with the X-series controller.

• High Initial torque
• Peak power
• Maximum reliability
• No cut-out with full power in bumpy terrain
• Instant throttle response
• Refined torque sensor tuning
• Simplified app
• Fully programmable via display, so using the app is not mandatory
• Plug-and-play

 

 

X-SERIES CONTROLLERS

UNLEASH CYC MOTOR POTENTIAL

Instant torque and power, stable off-road performance, responsive throttle, refined pedal assist experience, the X-series controllers are the key components to power all CYC motor systems.

 Introducing the CYC Ride Control mobile app, aimed to unleash all the possibilities at your fingertips. Experience an advanced settings selection and an on-the-go mode on the horizon.  

ROTOR CORE & MOTOR 

With mechanically retained magnets inside the CYC motors, they are designed to reach high RPMs without failing under heat stress.

 Not only are the magnets mechanically secured, but CYC uses high-grade quality magnets that can withstand up to 180 degrees Celsius. Much more than the motor will reach during your ride, allowing for ease of mind during any conditions. 

​The X1 PRO motor is equipped with an SPM rotor to optimize the efficiency and torque with the small form factor. To prevent magnet loosening in the Gen 3 rotor, the magnets are mechanically retained by the sleeve in the rotor.

ISIS SPLINED CRANKSET 

Ensuring you have a durable crankset is crucial to any ebike. The new integrated torque sensing module allowed CYC to return to an ISIS-splined crankset so you can rest at ease knowing that no matter how hard you pedal, your crankset will stay secure. 

​WATER RESISTANT 

Love a muddy ride? What about rainy days or washing your bike? The bottom bracket bearings are now fully sealed to ensure maximum reliability with outdoor use.

All the previous water ingress point has been sealed properly with the upgrades. All the exposed bearings are also sealed, so the systems are now safe to wash and use under heavy rain conditions.

ADVANCED TORQUE SENSING TECHNOLOGY

Patented torque sensor technology offers one of the best pedal assist sensations in the ebike world. Paired with in-house firmware tuning and a robust sprag clutch, the CYC torque sensor ensures instant engagement and an intuitive pedal assist experience. The Gen 3 ISIS splined standard torque sensing system ensures durability even with extreme riding.

New CYC motors are equipped with the Gen 3 torque sensing technology exclusively developed in-house by our team of engineers and riders. Together they achieved a pedal assist experience for conversion kits as you've never seen before! 

NATURAL, SMOOTH RIDING  

Equipped with patent pending torque sensor module, you get a refined pedal assist system. The torque sensor module includes both a high-sensitivity torque sensor strain gauge module and a cadence sensing module. The high number of poles of the cadence sensor ensures you can control the sensitivity to a much higher degree & provides the opportunity to fine-tune the firmware alongside rider inputs. The result? Unprecedented ebiking! 

The ALGORITHM in the CYC torque-sensing firmware IS EVERYTHING.

The CYC PAS firmware algorithm is the secret sauce for an ultimate riding experience. They really did it! CYC engineers stepped up to the challenge and proudly present a world-class pedal assist experience.

SEALED, INTEGRATED, & BUILT TO LAST 

The new Gen 3 PAS (pedal assist system) sits integrated with the robust sprag clutch module, so there's no external wiring to get caught, bent, or accidentally snapped. The CYC PAS runs with the torque and cadence signal collected and is processed by the controller to give you a pedal assist feeling like never before.  

TESTED BY PROFESSIONALS 

Not only was the firmware written alongside our team riders, CYC made sure that key partners got a chance to test it! Electrify Bike in North America and other partners around the world put it to the test.

NEXT GENERATION ELECTRONICS

The latest X-Controller series is built to give you ultimate freedom. In-house firmware optimizes the throttle and pedal assist experience. Paired with the CYC Ride Control mobile app, you can unleash all the possibilities at your fingertips.

The mobile app is not the only way to customize your system. The controller is also programmable via the included display. Integrated for your convenience.

CYC RIDE CONTROL

Pair the CYC Ride Control mobile app with the X-Controller Series and it gives you the ultimate freedom to ride your way. Via Bluetooth connectivity, your ebike experience is now more integrated than ever. 

UNPRECEDENTED PERFORMANCE

The X-Controller Series is designed for you with in-house firmware giving way to optimized pedal assist and throttle experience. This enabled CYC to find the sweet spot between natural riding and pure power to open a world for conversion kits like no other.  

WATERPROOF CONTROLLER

The X-Controller Series is *IP66 rated, making sure that you can jump, shred, and wash in any conditions. The cables and connectors are also waterproof, making any time the right time for a ride.

POWERED BY VESC 

The VESC® Project is an open-source platform. For X-Controller Series use with VESC® Software, please contact the CYC support team.

X-Series Controller family specifications:

	X6P	X6	X12
Nominal Voltage	36-52V	36-72V	36-72V
Peak Phase Current	90A	90A	180A
Peak Battery Current	40A	65A	100A
Sensorless Start	No	No	No
Bluetooth mobile app support	Yes	Yes	Yes
IP Rating	IP67 (TBC)	IP66	IP66
Supported Torque Sensor	Built-in torque sensor	Gen 2; Gen 3	Gen 2; Gen 3
Display Compatibility	500c; 750c; SW102; DS103  *with CYC firmware only	500c; 750c; SW102; DS103  *with CYC firmware only	500c; 750c; SW102; DS103  *with CYC firmware only
CYC Product Compatibility	Photon	X1 Pro Gen 2, X1 Pro Gen 3, X1 Stealth Gen 1, and X1 Stealth Gen 3	X1 Pro Gen 2, X1 Pro Gen 3

WARRANTY 

With a 2-year warranty, CYC will continue to have your back. CYC stands by their systems and want to ensure that you have maximum fun without disappointment along the way.